Features and benefits:
 Two independent power supplies, two tower four spindles to heat two different workpieces.- The output of power supply variable in frequency, power and frequency adjusted manually and automatically
- CNC scanning tower
- User-friendly PC/PLC based controls simplify set-up, changeover, diagnostics and process monitoring
- Energy monitor, good/reject workpiece function
- Ground detector protesting coils and workpieces from damaging
- Unitized and effective recirculating cooling water system
- Two tower with four spindles, two tower with two spindles.
- Adjustable rotation speed and scanning speed and distance
- T-bus and single bus
- Reliable insta-change coil adapters
- Optional manually¡¢automatically¡¢pneumatically actuated upper centers
- Optional manual¡¢automatic¡¢photoeletric access door
- Manual and automatic lubrication system
- Automatically detection of cooling water flow rate
- Automatically detection of quenchant flow rate
- Automatically detection of workpiece rotation
- Automatically detection of workpiece orientation
- Automatically detection of filter blocked on quenchant path
- Automatically detection of cooling water and quenchant temperature
- Pressure switches on all water cooled capacitors and critical water paths
- Repeatability in the range of 0.05mm
Specification
| Power rating |
45kW/200kHz,50kW/30kHz, 75kW/10kHz,90Kw/200kHz,100kW/30kHz,150kW/10kHz, other power supply available upon request, all of power with dual frequency if required. |
| Scanning distance |
610mm |
| Spindle rotation |
0¡«139RPM |
| Cooling system |
Heat exchanger£¬centrifugal pump£¬temperature controller£¬pressure gauge and valve |
| Quench system |
Heat exchanger£¬centrifugal pump£¬temperature controller£¬pressure gauge and valve, heater on the quenchant tank. |
| Tank capacity |
863L |
| Scanning speed |
0~152mm/sec. |
| Control system |
SIMENS S7-300 ,AB SLC503 |
| Program entry |
Data entry through function keys and numeric keypad |
| Program storage |
Program stored internally |
| Workpiece capacity |
length£º762mmweight£º10kg/each spindle |
| Machine dimension |
length£º1683mmwidth£º 1180mmheight£¨tower down£©£º2070mm height£¨tower up£©£º2356mm |
| Machine weight |
680kg |
| Power requirements |
45kW/200kHz63KVA, 480V, 50/60Hz, 3Phase 50kW/30kHz70KVA, 480V, 50/60Hz, 3Phase 75kW/10kHz105KVA, 480V, 50/60Hz, 3Phase 90kW/200kHz126KVA, 480V, 50/60Hz, 3Phase 100kW/30kHz140KVA, 480V, 50/60Hz, 3Phase 150kW/10kHz210KVA, 480V, 50/60Hz, 3Phase |
| Plant water requirements Inlet temperature:30¡æ Pressure: 4 bar |
45kW76lpm 50kW117lpm 75kW178lpm 100kW235lpm 150kW352lpm |
|
|
